🇸🇦 Serving Saudi Arabia & the GCC  •  🇵🇰 Recruiting from Pakistan  •  Govt. Licensed OEP-0664-Rawalpindi

/
/
Welder Jobs in Saudi Arabia: Tests and Steps from Pakistan
From the Blog

Welder Jobs in Saudi Arabia: Tests and Steps from Pakistan

How the Skill Verification Program test differs from the employer's weld test, and the six steps from Pakistan to a Saudi site.

Welding is one of the trades where the paperwork can matter as much as the skill. If you are looking for welder jobs in Saudi Arabia from Pakistan, you will meet two different tests, a medical, a visa and a registration, and the order in which they come is not obvious from the adverts. This guide sets out the tests and steps in sequence, so you know what to ask before you pay or travel.

Welder jobs in Saudi Arabia, tests and steps from Pakistan — Al Abbasi Enterprises, licence OEP-0664-Rawalpindi

It is written for welders in Pakistan, and it also explains to Gulf employers how a licensed promoter supplies and tests welders.

What welder jobs in Saudi Arabia cover

“Welder” is a broad word. A vacancy may mean any of these:

  • Structural welders, who join steel sections for buildings, sheds, bridges and supports.
  • Pipe welders, who weld pipework for water, oil, gas and industrial plant, where the weld has to hold pressure.
  • Fabrication welders, who build tanks, frames, vessels and equipment in a workshop from drawings.

Each of these uses different processes, such as stick, TIG or MIG welding, and different materials. The employer will name the process and material it needs. If your experience is mostly in one process, say so plainly in your application rather than claiming all of them.

Why Saudi employers recruit welders from Pakistan

Construction, fabrication yards, maintenance shutdowns and industrial plants all need welders, and a qualified welder is hard to replace in the middle of a project. Gulf contractors have recruited skilled tradesmen from Pakistan for decades and understand how to assess them. What they will not do is accept “ten years” on a CV without seeing the work.

The two tests: SVP and the employer’s weld test

Welders often face two separate checks, and it helps to keep them apart.

The Skill Verification Program trade test

The Skill Verification Program is the Saudi trade test run by Takamol, with approved test centres in Pakistan. At the time of writing, the list published on the NAVTTC Takamol page shows no single trade called “Welder”. It shows related trades instead: Welding, Manual Welder, Plate Welder (3 mm and above), Welding Assistant and Automated Mechanised Arc Weld. Which one appears on your visa depends on the employer’s demand letter, so ask your promoter to confirm the exact trade name before you register. The test verifies skills you already have; you register with your passport and attend a test centre with your passport and CNIC.

The employer’s weld qualification test

Many projects also require the welder to pass a qualification test to the welding procedure or code the project specifies. It is usually a practical test on a plate or pipe sample, in a stated process and position, checked afterwards by the employer’s inspector. The SVP certificate does not replace it. Ask the employer which code, process and position will apply, and practise those before you go.

The 6 steps from Pakistan to a Saudi site

  1. Demand letter. The Saudi employer states the occupation, the number of workers and the contract terms. Pay for a welder is set here, so treat any figure quoted before a demand letter exists as a guess.
  2. Trade test. The SVP test in the trade named for your visa, if that occupation is notified at the time you apply.
  3. Documents. Passport, CNIC, trade certificates and experience letters that name the process and the kind of work you did.
  4. Medical. The GAMCA medical at an approved centre. Good eyesight matters for welders, so deal with any vision concerns before you attend.
  5. Visa and Protector. The visa is stamped, biometrics are taken, and you register with the Protector of Emigrants before you travel.
  6. Arrival. Your employer arranges the residence permit, the site induction and the weld qualification test if it was not done earlier.

What a welder should check in the offer

  • The exact trade on the visa, which should describe welding work.
  • The basic monthly pay as a figure, separate from allowances and overtime.
  • Who pays for the weld test, consumables for it and any site safety certification.
  • Accommodation and transport to site, written down rather than promised.

Never accept an offer you have not seen in writing. If a recruiter will not show you the demand letter, treat that as a warning.

For employers: supplying welders

If you need welders for a Saudi or Gulf project, we can supply the trade against your demand letter, coordinate the Skill Verification Program test and medical, and process visa documents through to Protector registration. Tell us the process, material, position and the code your inspector works to, and we will tell you whether we can match candidates. Our manpower recruitment service for Gulf employers explains how the engagement works. Final acceptance is always the employer’s own test and decision.

Frequently asked questions

What should I prepare before the practical test?

Ask about the process, position and code, then practise on the same kind of material if you can. It helps to know the expected thickness and whether the sample is plate or pipe.

Is there a Welder trade on the SVP list?

At the time of writing there is no entry named simply “Welder”, but there are several welding-related trades. Confirm which one your visa uses.

Does an SVP certificate replace the employer’s weld test?

No. They check different things, and the employer decides whether to require its own qualification.

How much will I earn?

Whatever the demand letter and contract say. Pay for the same trade varies by employer and project.

Working with a licensed promoter

Al Abbasi Enterprises has been licensed as an Overseas Employment Promoter since 1988 under licence OEP-0664-Rawalpindi. If you are a welder with documented experience, send us your details and we will tell you whether a current demand fits your process and experience. We do not guarantee visas or dates, because they depend on the employer and the authorities.

See each stage on our recruitment process page, or contact our Rawalpindi office quoting licence OEP-0664-Rawalpindi.

Government licensed. Al Abbasi Enterprises is a registered Overseas Employment Promoter in Pakistan, licence OEP-0664-Rawalpindi. Always verify a recruiter’s licence before paying anything.

WhatsApp
Facebook
LinkedIn
Twitter
Email

Hiring, or looking to work abroad?

Tell us what you need and our team will reply within one business day — in English, Urdu or Arabic.