Oil and gas manpower is not one category. A refinery shutdown, a pipeline build and a gas plant expansion each need a different mix of welders, pipe fitters, electricians, instrument technicians and support trades. This guide explains which trades employers typically ask for from Pakistan, how testing fits in, and the hiring steps from demand to departure.

It is written for Gulf contractors and employers. We give no wage figures and no guaranteed timelines, because both depend on your contract and on the authorities involved.
Why oil and gas hiring needs a tighter process
On an energy site the cost of an unqualified worker is not just poor output. Hot work, pressure systems and live electrical equipment mean employers verify skill before they accept anyone. Contractors therefore ask for documented experience, a trade test where one exists, a clean medical and, often, site-specific safety training that the employer specifies.
That is why a licensed promoter’s job is mostly verification: matching each worker’s paperwork and practical skill to the trade named in your demand.
Trades employers commonly request
Requirements differ by project, but the following trade groups come up repeatedly in oil and gas, refining and petrochemical work.
Welding and fabrication
Manual and plate welders, pipe and tube fabricators and structural steel workers. Employers usually want evidence of the welding processes and positions the worker has used, and often run their own qualification test on arrival or before.
Piping
Pipe fitters, pipe installers and boiler and pipe installation technicians, who do the fitting and assembly that connects vessels, pumps and lines.
Electrical and instrumentation
Electricians, electrical technicians and instrumentation and control technicians, who work on power distribution, motors, control panels and field instruments.
Mechanical and heavy equipment
Mechanical technicians, machinery maintenance technicians, heavy equipment technicians and heavy truck drivers, who keep plant and transport running.
Scaffolding, rigging and support
Scaffold workers, riggers, painters and general site labour. Health and safety advisers are also a recognised occupation in Saudi Arabia’s trade-testing programme.
Our overview of the skilled trades Saudi Arabia is hiring places these within the wider labour market.
How trade testing applies
Saudi Arabia runs the Skill Verification Program for occupations that Takamol has notified. At the time of writing, the list published by NAVTTC includes occupations such as manual welder, plate welder, pipe fitting and assembly technician, pipe installer, electrician, instrumentation and control technician and scaffold labourer. It does not list every oil and gas role. Rigger, for example, does not appear on that list, so for such roles the employer’s own practical test is usually the check.
Lists change, so confirm against the demand before any worker pays for a certificate. Our guide to the Saudi trade test explains the process, and our trade testing and medical coordination service shows how we arrange it.
The hiring steps, from demand to departure
- Define the roles. Name each trade precisely: “pipe fitter” and “pipe fabricator” are not interchangeable, and the registered profession matters later for the permit.
- Issue the demand. The employer’s demand sets out the trades, numbers and terms. Wages are fixed here and in the contract, not by an agent.
- Source and screen. Experience letters should name the employer, the dates and the work done. Practical interviews separate real experience from claimed experience.
- Test. Where a Takamol-notified trade applies, the worker sits the test; elsewhere the employer’s practical assessment applies.
- Medical. Workers complete the required medical examination at an approved centre.
- Visa and Protector. The visa is processed and the worker registers with the Protector of Emigrants before leaving Pakistan.
- Departure and induction. Travel is arranged, and the employer runs site induction and any project-specific safety training.
Experience letters deserve extra scrutiny in this sector. A letter that names the plant type, the equipment worked on and the dates is far more useful than a general statement of years served. We ask candidates for specifics and match them against the trade in the demand before any shortlist goes to the employer.
What oil and gas employers should specify
- Exact trade and level. Welder grade, pipe size range, voltage level or instrument type where relevant.
- Required certificates. If you need particular safety or welding qualifications, say so in the demand rather than after sourcing.
- Who tests. The employer, a third party or the Skill Verification Program.
- Site safety induction. What happens on arrival and who pays for it.
Employers sometimes ask whether one worker can be supplied across two trades, for example a welder who also fits pipe. Dual skills can help, but the registered profession should still reflect the main role, because the permit and later paperwork follow it.
Frequently asked questions
Do you supply helpers and general labour for energy sites too?
Yes, alongside skilled trades. General labour follows a simpler route, but it still needs a demand, a medical, a visa and Protector registration, and the employer should state any site safety requirements upfront.
Can you supply oil and gas workers for projects outside Saudi Arabia?
We recruit for Saudi Arabia and the wider Gulf, including the UAE, Qatar, Oman, Bahrain and Kuwait. The steps vary by country, so tell us where the project is.
Do all oil and gas trades need a trade test certificate?
No. Only occupations on the notified list do. Others rely on the employer’s own assessment, which should be agreed in the demand.
Can you guarantee workers by a set date?
No. Visas and approvals sit with the authorities. We can plan the stages and report progress at each one.
Working with a licensed promoter
Al Abbasi Enterprises has been licensed as an Overseas Employment Promoter since 1988 under licence OEP-0664-Rawalpindi. Our manpower recruitment service for Gulf employers covers sourcing, testing and documentation for energy and industrial projects, including work in Saudi Arabia.
Send us the trades and numbers you need and we will explain how the work would run. Contact our Rawalpindi office to begin.